Contract Address Details

// Sources flattened with hardhat v2.19.0 https://hardhat.org

// SPDX-License-Identifier: AGPL-3.0-only AND BUSL-1.1 AND MIT AND Unlicense

// File @layerzerolabs/solidity-examples/contracts/lzApp/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity >=0.5.0;

interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(
        uint16 _version,
        uint16 _chainId,
        uint _configType,
        bytes calldata _config
    ) external;

    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;

    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;

    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}


// File @layerzerolabs/solidity-examples/contracts/lzApp/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity >=0.5.0;

interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(
        uint16 _dstChainId,
        bytes calldata _destination,
        bytes calldata _payload,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes calldata _adapterParams
    ) external payable;

    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        address _dstAddress,
        uint64 _nonce,
        uint _gasLimit,
        bytes calldata _payload
    ) external;

    // @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);

    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);

    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(
        uint16 _dstChainId,
        address _userApplication,
        bytes calldata _payload,
        bool _payInZRO,
        bytes calldata _adapterParam
    ) external view returns (uint nativeFee, uint zroFee);

    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);

    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        bytes calldata _payload
    ) external;

    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);

    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);

    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);

    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);

    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);

    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(
        uint16 _version,
        uint16 _chainId,
        address _userApplication,
        uint _configType
    ) external view returns (bytes memory);

    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);

    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}


// File @layerzerolabs/solidity-examples/contracts/libraries/[email protected]

// Original license: SPDX_License_Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gon├ºalo S├í <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;

library BytesLib {
    function concat(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bytes memory) {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(
                0x40,
                and(
                    add(add(end, iszero(add(length, mload(_preBytes)))), 31),
                    not(31) // Round down to the nearest 32 bytes.
                )
            )
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(and(fslot, 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00), and(mload(mc), mask)))

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint _start,
        uint _length
    ) internal pure returns (bytes memory) {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1, "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint _start) internal pure returns (uint) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(bytes storage _preBytes, bytes memory _postBytes) internal view returns (bool) {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        for {

                        } eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}


// File @layerzerolabs/solidity-examples/contracts/lzApp/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity >=0.5.0;

interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        uint64 _nonce,
        bytes calldata _payload
    ) external;
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File @layerzerolabs/solidity-examples/contracts/lzApp/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.0;





/*
 * a generic LzReceiver implementation
 */
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    using BytesLib for bytes;

    // ua can not send payload larger than this by default, but it can be changed by the ua owner
    uint public constant DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;

    ILayerZeroEndpoint public immutable lzEndpoint;
    mapping(uint16 => bytes) public trustedRemoteLookup;
    mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
    mapping(uint16 => uint) public payloadSizeLimitLookup;
    address public precrime;

    event SetPrecrime(address precrime);
    event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
    event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
    event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);

    constructor(address _endpoint) {
        lzEndpoint = ILayerZeroEndpoint(_endpoint);
    }

    function lzReceive(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        uint64 _nonce,
        bytes calldata _payload
    ) public virtual override {
        // lzReceive must be called by the endpoint for security
        require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");

        bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
        // if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
        require(
            _srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote),
            "LzApp: invalid source sending contract"
        );

        _blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }

    // abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
    function _blockingLzReceive(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64 _nonce,
        bytes memory _payload
    ) internal virtual;

    function _lzSend(
        uint16 _dstChainId,
        bytes memory _payload,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes memory _adapterParams,
        uint _nativeFee
    ) internal virtual {
        bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
        require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
        _checkPayloadSize(_dstChainId, _payload.length);
        lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function _checkGasLimit(
        uint16 _dstChainId,
        uint16 _type,
        bytes memory _adapterParams,
        uint _extraGas
    ) internal view virtual {
        uint providedGasLimit = _getGasLimit(_adapterParams);
        uint minGasLimit = minDstGasLookup[_dstChainId][_type];
        require(minGasLimit > 0, "LzApp: minGasLimit not set");
        require(providedGasLimit >= minGasLimit + _extraGas, "LzApp: gas limit is too low");
    }

    function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
        require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
        assembly {
            gasLimit := mload(add(_adapterParams, 34))
        }
    }

    function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
        uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
        if (payloadSizeLimit == 0) {
            // use default if not set
            payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
        }
        require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
    }

    //---------------------------UserApplication config----------------------------------------
    function getConfig(
        uint16 _version,
        uint16 _chainId,
        address,
        uint _configType
    ) external view returns (bytes memory) {
        return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
    }

    // generic config for LayerZero user Application
    function setConfig(
        uint16 _version,
        uint16 _chainId,
        uint _configType,
        bytes calldata _config
    ) external override onlyOwner {
        lzEndpoint.setConfig(_version, _chainId, _configType, _config);
    }

    function setSendVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setSendVersion(_version);
    }

    function setReceiveVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setReceiveVersion(_version);
    }

    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }

    // _path = abi.encodePacked(remoteAddress, localAddress)
    // this function set the trusted path for the cross-chain communication
    function setTrustedRemote(uint16 _remoteChainId, bytes calldata _path) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = _path;
        emit SetTrustedRemote(_remoteChainId, _path);
    }

    function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
        emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
    }

    function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
        bytes memory path = trustedRemoteLookup[_remoteChainId];
        require(path.length != 0, "LzApp: no trusted path record");
        return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
    }

    function setPrecrime(address _precrime) external onlyOwner {
        precrime = _precrime;
        emit SetPrecrime(_precrime);
    }

    function setMinDstGas(
        uint16 _dstChainId,
        uint16 _packetType,
        uint _minGas
    ) external onlyOwner {
        minDstGasLookup[_dstChainId][_packetType] = _minGas;
        emit SetMinDstGas(_dstChainId, _packetType, _minGas);
    }

    // if the size is 0, it means default size limit
    function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
        payloadSizeLimitLookup[_dstChainId] = _size;
    }

    //--------------------------- VIEW FUNCTION ----------------------------------------
    function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
        bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
        return keccak256(trustedSource) == keccak256(_srcAddress);
    }
}


// File @layerzerolabs/solidity-examples/contracts/libraries/[email protected]

// Original license: SPDX_License_Identifier: MIT
pragma solidity >=0.7.6;

library ExcessivelySafeCall {
    uint constant LOW_28_MASK = 0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;

    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeCall(
        address _target,
        uint _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal returns (bool, bytes memory) {
        // set up for assembly call
        uint _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := call(
                _gas, // gas
                _target, // recipient
                0, // ether value
                add(_calldata, 0x20), // inloc
                mload(_calldata), // inlen
                0, // outloc
                0 // outlen
            )
            // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
            // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
            // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }

    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeStaticCall(
        address _target,
        uint _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal view returns (bool, bytes memory) {
        // set up for assembly call
        uint _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := staticcall(
                _gas, // gas
                _target, // recipient
                add(_calldata, 0x20), // inloc
                mload(_calldata), // inlen
                0, // outloc
                0 // outlen
            )
            // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
            // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
            // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }

    /**
     * @notice Swaps function selectors in encoded contract calls
     * @dev Allows reuse of encoded calldata for functions with identical
     * argument types but different names. It simply swaps out the first 4 bytes
     * for the new selector. This function modifies memory in place, and should
     * only be used with caution.
     * @param _newSelector The new 4-byte selector
     * @param _buf The encoded contract args
     */
    function swapSelector(bytes4 _newSelector, bytes memory _buf) internal pure {
        require(_buf.length >= 4);
        uint _mask = LOW_28_MASK;
        assembly {
            // load the first word of
            let _word := mload(add(_buf, 0x20))
            // mask out the top 4 bytes
            // /x
            _word := and(_word, _mask)
            _word := or(_newSelector, _word)
            mstore(add(_buf, 0x20), _word)
        }
    }
}


// File @layerzerolabs/solidity-examples/contracts/lzApp/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.0;


/*
 * the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
 * this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
 * NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
 */
abstract contract NonblockingLzApp is LzApp {
    using ExcessivelySafeCall for address;

    constructor(address _endpoint) LzApp(_endpoint) {}

    mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;

    event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
    event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);

    // overriding the virtual function in LzReceiver
    function _blockingLzReceive(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64 _nonce,
        bytes memory _payload
    ) internal virtual override {
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(
            gasleft(),
            150,
            abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload)
        );
        // try-catch all errors/exceptions
        if (!success) {
            _storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
        }
    }

    function _storeFailedMessage(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64 _nonce,
        bytes memory _payload,
        bytes memory _reason
    ) internal virtual {
        failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
        emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
    }

    function nonblockingLzReceive(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        uint64 _nonce,
        bytes calldata _payload
    ) public virtual {
        // only internal transaction
        require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }

    //@notice override this function
    function _nonblockingLzReceive(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64 _nonce,
        bytes memory _payload
    ) internal virtual;

    function retryMessage(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        uint64 _nonce,
        bytes calldata _payload
    ) public payable virtual {
        // assert there is message to retry
        bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
        require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
        require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
        // clear the stored message
        failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
        // execute the message. revert if it fails again
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
        emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
    }
}


// File @openzeppelin/contracts/utils/introspection/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @layerzerolabs/solidity-examples/contracts/token/oft/v2/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity >=0.5.0;

/**
 * @dev Interface of the IOFT core standard
 */
interface ICommonOFT is IERC165 {

    struct LzCallParams {
        address payable refundAddress;
        address zroPaymentAddress;
        bytes adapterParams;
    }

    /**
     * @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
     * _dstChainId - L0 defined chain id to send tokens too
     * _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
     * _amount - amount of the tokens to transfer
     * _useZro - indicates to use zro to pay L0 fees
     * _adapterParam - flexible bytes array to indicate messaging adapter services in L0
     */
    function estimateSendFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);

    function estimateSendAndCallFee(uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes calldata _payload, uint64 _dstGasForCall, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);

    /**
     * @dev returns the circulating amount of tokens on current chain
     */
    function circulatingSupply() external view returns (uint);

    /**
     * @dev returns the address of the ERC20 token
     */
    function token() external view returns (address);
}


// File @layerzerolabs/solidity-examples/contracts/token/oft/v2/interfaces/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity >=0.5.0;

/**
 * @dev Interface of the IOFT core standard
 */
interface IOFTV2 is ICommonOFT {

    /**
     * @dev send `_amount` amount of token to (`_dstChainId`, `_toAddress`) from `_from`
     * `_from` the owner of token
     * `_dstChainId` the destination chain identifier
     * `_toAddress` can be any size depending on the `dstChainId`.
     * `_amount` the quantity of tokens in wei
     * `_refundAddress` the address LayerZero refunds if too much message fee is sent
     * `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
     * `_adapterParams` is a flexible bytes array to indicate messaging adapter services
     */
    function sendFrom(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, LzCallParams calldata _callParams) external payable;

    function sendAndCall(address _from, uint16 _dstChainId, bytes32 _toAddress, uint _amount, bytes calldata _payload, uint64 _dstGasForCall, LzCallParams calldata _callParams) external payable;
}


// File @layerzerolabs/solidity-examples/contracts/token/oft/v2/interfaces/[email protected]

// Original license: SPDX_License_Identifier: BUSL-1.1

pragma solidity >=0.5.0;

interface IOFTReceiverV2 {
    /**
     * @dev Called by the OFT contract when tokens are received from source chain.
     * @param _srcChainId The chain id of the source chain.
     * @param _srcAddress The address of the OFT token contract on the source chain.
     * @param _nonce The nonce of the transaction on the source chain.
     * @param _from The address of the account who calls the sendAndCall() on the source chain.
     * @param _amount The amount of tokens to transfer.
     * @param _payload Additional data with no specified format.
     */
    function onOFTReceived(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes32 _from, uint _amount, bytes calldata _payload) external;
}


// File @layerzerolabs/solidity-examples/contracts/token/oft/v2/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.0;




abstract contract OFTCoreV2 is NonblockingLzApp {
    using BytesLib for bytes;
    using ExcessivelySafeCall for address;

    uint public constant NO_EXTRA_GAS = 0;

    // packet type
    uint8 public constant PT_SEND = 0;
    uint8 public constant PT_SEND_AND_CALL = 1;

    uint8 public immutable sharedDecimals;

    mapping(uint16 => mapping(bytes => mapping(uint64 => bool))) public creditedPackets;

    /**
     * @dev Emitted when `_amount` tokens are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
     * `_nonce` is the outbound nonce
     */
    event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes32 indexed _toAddress, uint _amount);

    /**
     * @dev Emitted when `_amount` tokens are received from `_srcChainId` into the `_toAddress` on the local chain.
     * `_nonce` is the inbound nonce.
     */
    event ReceiveFromChain(uint16 indexed _srcChainId, address indexed _to, uint _amount);

    event CallOFTReceivedSuccess(uint16 indexed _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _hash);

    event NonContractAddress(address _address);

    // _sharedDecimals should be the minimum decimals on all chains
    constructor(uint8 _sharedDecimals, address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {
        sharedDecimals = _sharedDecimals;
    }

    /************************************************************************
     * public functions
     ************************************************************************/
    function callOnOFTReceived(
        uint16 _srcChainId,
        bytes calldata _srcAddress,
        uint64 _nonce,
        bytes32 _from,
        address _to,
        uint _amount,
        bytes calldata _payload,
        uint _gasForCall
    ) public virtual {
        require(_msgSender() == address(this), "OFTCore: caller must be OFTCore");

        // send
        _amount = _transferFrom(address(this), _to, _amount);
        emit ReceiveFromChain(_srcChainId, _to, _amount);

        // call
        IOFTReceiverV2(_to).onOFTReceived{gas: _gasForCall}(_srcChainId, _srcAddress, _nonce, _from, _amount, _payload);
    }

    /************************************************************************
     * internal functions
     ************************************************************************/
    function _estimateSendFee(
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        bool _useZro,
        bytes memory _adapterParams
    ) internal view virtual returns (uint nativeFee, uint zroFee) {
        // mock the payload for sendFrom()
        bytes memory payload = _encodeSendPayload(_toAddress, _ld2sd(_amount));
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }

    function _estimateSendAndCallFee(
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        bytes memory _payload,
        uint64 _dstGasForCall,
        bool _useZro,
        bytes memory _adapterParams
    ) internal view virtual returns (uint nativeFee, uint zroFee) {
        // mock the payload for sendAndCall()
        bytes memory payload = _encodeSendAndCallPayload(msg.sender, _toAddress, _ld2sd(_amount), _payload, _dstGasForCall);
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }

    function _nonblockingLzReceive(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64 _nonce,
        bytes memory _payload
    ) internal virtual override {
        uint8 packetType = _payload.toUint8(0);

        if (packetType == PT_SEND) {
            _sendAck(_srcChainId, _srcAddress, _nonce, _payload);
        } else if (packetType == PT_SEND_AND_CALL) {
            _sendAndCallAck(_srcChainId, _srcAddress, _nonce, _payload);
        } else {
            revert("OFTCore: unknown packet type");
        }
    }

    function _send(
        address _from,
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes memory _adapterParams
    ) internal virtual returns (uint amount) {
        _checkGasLimit(_dstChainId, PT_SEND, _adapterParams, NO_EXTRA_GAS);

        (amount, ) = _removeDust(_amount);
        amount = _debitFrom(_from, _dstChainId, _toAddress, amount); // amount returned should not have dust
        require(amount > 0, "OFTCore: amount too small");

        bytes memory lzPayload = _encodeSendPayload(_toAddress, _ld2sd(amount));
        _lzSend(_dstChainId, lzPayload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);

        emit SendToChain(_dstChainId, _from, _toAddress, amount);
    }

    function _sendAck(
        uint16 _srcChainId,
        bytes memory,
        uint64,
        bytes memory _payload
    ) internal virtual {
        (address to, uint64 amountSD) = _decodeSendPayload(_payload);
        if (to == address(0)) {
            to = address(0xdead);
        }

        uint amount = _sd2ld(amountSD);
        amount = _creditTo(_srcChainId, to, amount);

        emit ReceiveFromChain(_srcChainId, to, amount);
    }

    function _sendAndCall(
        address _from,
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        bytes memory _payload,
        uint64 _dstGasForCall,
        address payable _refundAddress,
        address _zroPaymentAddress,
        bytes memory _adapterParams
    ) internal virtual returns (uint amount) {
        _checkGasLimit(_dstChainId, PT_SEND_AND_CALL, _adapterParams, _dstGasForCall);

        (amount, ) = _removeDust(_amount);
        amount = _debitFrom(_from, _dstChainId, _toAddress, amount);
        require(amount > 0, "OFTCore: amount too small");

        // encode the msg.sender into the payload instead of _from
        bytes memory lzPayload = _encodeSendAndCallPayload(msg.sender, _toAddress, _ld2sd(amount), _payload, _dstGasForCall);
        _lzSend(_dstChainId, lzPayload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);

        emit SendToChain(_dstChainId, _from, _toAddress, amount);
    }

    function _sendAndCallAck(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64 _nonce,
        bytes memory _payload
    ) internal virtual {
        (bytes32 from, address to, uint64 amountSD, bytes memory payloadForCall, uint64 gasForCall) = _decodeSendAndCallPayload(_payload);

        bool credited = creditedPackets[_srcChainId][_srcAddress][_nonce];
        uint amount = _sd2ld(amountSD);

        // credit to this contract first, and then transfer to receiver only if callOnOFTReceived() succeeds
        if (!credited) {
            amount = _creditTo(_srcChainId, address(this), amount);
            creditedPackets[_srcChainId][_srcAddress][_nonce] = true;
        }

        if (!_isContract(to)) {
            emit NonContractAddress(to);
            return;
        }

        // workaround for stack too deep
        uint16 srcChainId = _srcChainId;
        bytes memory srcAddress = _srcAddress;
        uint64 nonce = _nonce;
        bytes memory payload = _payload;
        bytes32 from_ = from;
        address to_ = to;
        uint amount_ = amount;
        bytes memory payloadForCall_ = payloadForCall;

        // no gas limit for the call if retry
        uint gas = credited ? gasleft() : gasForCall;
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(
            gasleft(),
            150,
            abi.encodeWithSelector(this.callOnOFTReceived.selector, srcChainId, srcAddress, nonce, from_, to_, amount_, payloadForCall_, gas)
        );

        if (success) {
            bytes32 hash = keccak256(payload);
            emit CallOFTReceivedSuccess(srcChainId, srcAddress, nonce, hash);
        } else {
            // store the failed message into the nonblockingLzApp
            _storeFailedMessage(srcChainId, srcAddress, nonce, payload, reason);
        }
    }

    function _isContract(address _account) internal view returns (bool) {
        return _account.code.length > 0;
    }

    function _ld2sd(uint _amount) internal view virtual returns (uint64) {
        uint amountSD = _amount / _ld2sdRate();
        require(amountSD <= type(uint64).max, "OFTCore: amountSD overflow");
        return uint64(amountSD);
    }

    function _sd2ld(uint64 _amountSD) internal view virtual returns (uint) {
        return _amountSD * _ld2sdRate();
    }

    function _removeDust(uint _amount) internal view virtual returns (uint amountAfter, uint dust) {
        dust = _amount % _ld2sdRate();
        amountAfter = _amount - dust;
    }

    function _encodeSendPayload(bytes32 _toAddress, uint64 _amountSD) internal view virtual returns (bytes memory) {
        return abi.encodePacked(PT_SEND, _toAddress, _amountSD);
    }

    function _decodeSendPayload(bytes memory _payload) internal view virtual returns (address to, uint64 amountSD) {
        require(_payload.toUint8(0) == PT_SEND && _payload.length == 41, "OFTCore: invalid payload");

        to = _payload.toAddress(13); // drop the first 12 bytes of bytes32
        amountSD = _payload.toUint64(33);
    }

    function _encodeSendAndCallPayload(
        address _from,
        bytes32 _toAddress,
        uint64 _amountSD,
        bytes memory _payload,
        uint64 _dstGasForCall
    ) internal view virtual returns (bytes memory) {
        return abi.encodePacked(PT_SEND_AND_CALL, _toAddress, _amountSD, _addressToBytes32(_from), _dstGasForCall, _payload);
    }

    function _decodeSendAndCallPayload(bytes memory _payload)
        internal
        view
        virtual
        returns (
            bytes32 from,
            address to,
            uint64 amountSD,
            bytes memory payload,
            uint64 dstGasForCall
        )
    {
        require(_payload.toUint8(0) == PT_SEND_AND_CALL, "OFTCore: invalid payload");

        to = _payload.toAddress(13); // drop the first 12 bytes of bytes32
        amountSD = _payload.toUint64(33);
        from = _payload.toBytes32(41);
        dstGasForCall = _payload.toUint64(73);
        payload = _payload.slice(81, _payload.length - 81);
    }

    function _addressToBytes32(address _address) internal pure virtual returns (bytes32) {
        return bytes32(uint(uint160(_address)));
    }

    function _debitFrom(
        address _from,
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount
    ) internal virtual returns (uint);

    function _creditTo(
        uint16 _srcChainId,
        address _toAddress,
        uint _amount
    ) internal virtual returns (uint);

    function _transferFrom(
        address _from,
        address _to,
        uint _amount
    ) internal virtual returns (uint);

    function _ld2sdRate() internal view virtual returns (uint);
}


// File @openzeppelin/contracts/utils/introspection/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


// File @layerzerolabs/solidity-examples/contracts/token/oft/v2/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.0;



abstract contract BaseOFTV2 is OFTCoreV2, ERC165, IOFTV2 {
    constructor(uint8 _sharedDecimals, address _lzEndpoint) OFTCoreV2(_sharedDecimals, _lzEndpoint) {}

    /************************************************************************
     * public functions
     ************************************************************************/
    function sendFrom(
        address _from,
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        LzCallParams calldata _callParams
    ) public payable virtual override {
        _send(_from, _dstChainId, _toAddress, _amount, _callParams.refundAddress, _callParams.zroPaymentAddress, _callParams.adapterParams);
    }

    function sendAndCall(
        address _from,
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        bytes calldata _payload,
        uint64 _dstGasForCall,
        LzCallParams calldata _callParams
    ) public payable virtual override {
        _sendAndCall(
            _from,
            _dstChainId,
            _toAddress,
            _amount,
            _payload,
            _dstGasForCall,
            _callParams.refundAddress,
            _callParams.zroPaymentAddress,
            _callParams.adapterParams
        );
    }

    /************************************************************************
     * public view functions
     ************************************************************************/
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IOFTV2).interfaceId || super.supportsInterface(interfaceId);
    }

    function estimateSendFee(
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        bool _useZro,
        bytes calldata _adapterParams
    ) public view virtual override returns (uint nativeFee, uint zroFee) {
        return _estimateSendFee(_dstChainId, _toAddress, _amount, _useZro, _adapterParams);
    }

    function estimateSendAndCallFee(
        uint16 _dstChainId,
        bytes32 _toAddress,
        uint _amount,
        bytes calldata _payload,
        uint64 _dstGasForCall,
        bool _useZro,
        bytes calldata _adapterParams
    ) public view virtual override returns (uint nativeFee, uint zroFee) {
        return _estimateSendAndCallFee(_dstChainId, _toAddress, _amount, _payload, _dstGasForCall, _useZro, _adapterParams);
    }

    function circulatingSupply() public view virtual override returns (uint);

    function token() public view virtual override returns (address);
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address to, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual override returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, amount);
        _transfer(from, to, amount);
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, allowance(owner, spender) + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        address owner = _msgSender();
        uint256 currentAllowance = allowance(owner, spender);
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(owner, spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `from` must have a balance of at least `amount`.
     */
    function _transfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(from, to, amount);

        uint256 fromBalance = _balances[from];
        require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[from] = fromBalance - amount;
            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
            // decrementing then incrementing.
            _balances[to] += amount;
        }

        emit Transfer(from, to, amount);

        _afterTokenTransfer(from, to, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        unchecked {
            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
            _balances[account] += amount;
        }
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
            // Overflow not possible: amount <= accountBalance <= totalSupply.
            _totalSupply -= amount;
        }

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.
     *
     * Does not update the allowance amount in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Might emit an {Approval} event.
     */
    function _spendAllowance(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            require(currentAllowance >= amount, "ERC20: insufficient allowance");
            unchecked {
                _approve(owner, spender, currentAllowance - amount);
            }
        }
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}


// File @layerzerolabs/solidity-examples/contracts/token/oft/v2/[email protected]

// Original license: SPDX_License_Identifier: MIT

pragma solidity ^0.8.0;


contract OFTV2 is BaseOFTV2, ERC20 {
    uint internal immutable ld2sdRate;

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _sharedDecimals,
        address _lzEndpoint
    ) ERC20(_name, _symbol) BaseOFTV2(_sharedDecimals, _lzEndpoint) {
        uint8 decimals = decimals();
        require(_sharedDecimals <= decimals, "OFT: sharedDecimals must be <= decimals");
        ld2sdRate = 10**(decimals - _sharedDecimals);
    }

    /************************************************************************
     * public functions
     ************************************************************************/
    function circulatingSupply() public view virtual override returns (uint) {
        return totalSupply();
    }

    function token() public view virtual override returns (address) {
        return address(this);
    }

    /************************************************************************
     * internal functions
     ************************************************************************/
    function _debitFrom(
        address _from,
        uint16,
        bytes32,
        uint _amount
    ) internal virtual override returns (uint) {
        address spender = _msgSender();
        if (_from != spender) _spendAllowance(_from, spender, _amount);
        _burn(_from, _amount);
        return _amount;
    }

    function _creditTo(
        uint16,
        address _toAddress,
        uint _amount
    ) internal virtual override returns (uint) {
        _mint(_toAddress, _amount);
        return _amount;
    }

    function _transferFrom(
        address _from,
        address _to,
        uint _amount
    ) internal virtual override returns (uint) {
        address spender = _msgSender();
        // if transfer from this contract, no need to check allowance
        if (_from != address(this) && _from != spender) _spendAllowance(_from, spender, _amount);
        _transfer(_from, _to, _amount);
        return _amount;
    }

    function _ld2sdRate() internal view virtual override returns (uint) {
        return ld2sdRate;
    }
}


// File contracts/SystemVersionId.sol

// Original license: SPDX_License_Identifier: AGPL-3.0-only

pragma solidity 0.8.19;

/**
 * @title SystemVersionId
 * @notice Base contract providing the system version identifier
 */
abstract contract SystemVersionId {
    /**
     * @dev The system version identifier
     */
    uint256 public constant SYSTEM_VERSION_ID = uint256(keccak256('Initial'));
}


// File contracts/interport-oft/InterportTokenOFT.sol

// Original license: SPDX_License_Identifier: AGPL-3.0-only

pragma solidity 0.8.19;


/**
 * @title InterportTokenOFT
 * @notice The Interport token OFT contract
 */
contract InterportTokenOFT is OFTV2, SystemVersionId {
    /**
     * @notice Deploys the InterportTokenOFT contract
     * @param _lzEndpoint The address of the LayerZero endpoint
     */
    constructor(address _lzEndpoint) OFTV2('Interport Token', 'ITP', 8, _lzEndpoint) {}
}